Upgrade of beamline BL08B at Taiwan Light Source from a photon‐BPM to a double‐grating SGM beamline

During the last 20 years, beamline BL08B has been upgraded step by step from a photon beam‐position monitor (BPM) to a testing beamline and a single‐grating beamline that enables experiments to record X‐ray photo‐emission spectra (XPS) and X‐ray absorption spectra (XAS) for research in solar physics, organic semiconductor materials and spinel oxides, with soft X‐ray photon energies in the range 300–1000 eV. Demands for photon energy to extend to the extreme ultraviolet region for applications in nano‐fabrication and topological thin films are increasing. The basic spherical‐grating monochromator beamline was again upgraded by adding a second grating that delivers photons of energy from 80 to 420 eV. Four end‐stations were designed for experiments with XPS, XAS, interstellar photoprocess systems (IPS) and extreme‐ultraviolet lithography (EUVL) in the scheduled beam time. The data from these experiments show a large count rate in core levels probed and excellent statistics on background normalization in the L‐edge adsorption spectrum.     

多层材料结构的界面裂纹尖端复应力强度因子

本文建立了一种多层材料复合结构的界面裂纹问题分析模型。当两种材料之间插入第三种薄层弹性材料,裂纹位于第三种材料与第一或第二种弹性材料的界面上,且插页材料3~#的厚度相对于裂纹尺寸或平面内其他尺寸很小时,可以得到该问题裂纹尖端的复应力强度因子通式。本文用有限元法对结果进行了数值验证,并进行了有关问题的讨论。     

A UNIVERSAL APPROACH FOR CONTINUOUS OR DISCRETE NONLINEAR PROGRAMMINGS WITH MULTIPLE VARIABLES AND CONSTRAINTS

IntroductionExtensive research works have been published for solving nonlinear mathematicprogramming problems.Nonetheless,it is still difficult to find an effective and universalapproach for general programming problems with multiple design variables and …     

45钢柱壳膨胀断裂的应变率效应

采用前照明高速分幅照相技术拍摄到在爆轰加载下45钢柱壳表面裂纹生成、扩展及产物泄漏过程的清晰图像,较准确地测量了膨胀断裂的时间与应变。 45钢柱壳在炸药爆轰加载下,断裂应变随应变率的增加而增加,当应变率达到一定值,断裂应变随应变率的增加而降低,出现了动态断裂中的塑性峰现象。     

Beam subjected to eccentric longitudinal impact

This paper is concerned with an experimental investigation of the bending stresses in a bar subjected to eccentric longitudinal impact. The test beam was a round steel bar, 1 in. in diam and 8 ft long which was suspended by wires at two points. Strains were measured by SR-4 strain gages at 18 stations along the bar. The signals were fed through an amplifier to an oscilloscope and the trace on the screen was photographed for a permanent record. The impact was obtained by means of a striking bar with a conical end. The striking bar was suspended in a pendulum rig and striking height adjusted so as to impact the test bar at any desired eccentricity. The dimensionless impact durationt/T ₁ is about 0.02, whereT ₁ denotes the fundamental period of the beam. A theoretical analysis of the response of a free-free beam subjected to a dynamically applied end moment is undertaken to correlate analytical theories with the experimental results. The theoretical results based on the Timoshenko theory were found numerically, using the method of characteristics. Good agreement is found for the moment response curves at ten representative beam stations. Comparison is also made with related results from the Bernoulli-Euler theory, using the normalmode method. The numerical calculations were carried out on both IBM 704 and IBM 650 digital computers.     

复杂载荷三维裂纹分析双重边界元法

提出可用于高温、高转速状态下的热动力机械三维含裂构件热弹性分析方法——双重边界元法.首先建立了考虑温度及离心载荷的双重边界积分方程组,并对边界积分方程组的选取及适用范围进行了讨论。然后提出角非快调元模型离散技术。接着提出超奇异积分方程分析去除奇异性方法及数值积分技术.数值算例表明计算结果与有关权函数解十分吻合,说明了用双重边界元法计算复杂载荷条件下三维应力强度因子的有效性.还讨论了有关热应力强度因子权函数解的适用范围.     

架设阶段悬索桥静力问题的随机有限元分析

架设阶段的悬索桥不仅具有显著的几何非线性行为，而且存在材料特性的变异。本文建立了以增量形式表达的非线性摄动法随机有限元列式，并编制了悬索桥静力分析程序ＳＮＡＰ。针对一座国内在建的悬索桥，计算了该桥在某一施工阶段考虑缆索弹性模量随机性时主梁跨中点位移的变化。结果表明，材料随机性的影响十分明显。     

薄膜结构的几何非线性分析

使用动力松弛法对薄膜结构进行静载分析，并提出一种方法处理皱折单元以确保荷载分析的可靠性。薄膜结构如果在某膜单元的单向应力方向发生皱折，其单元本身仍然能够继续承受荷载，因此提出索松弛单元和膜皱折单元处理薄膜的索松弛和膜皱折问题。就索网结构和薄膜结构分类给出算例进行静载分析，算例表明本文的方法可以有效处理索松弛单元和膜皱折单元，确保荷载分析的准确性。     

应力波传播规律研究中的一种快速分析方法

本文提出了一种能快速、简便、直观地分析了应力波传播状况的方法。该方法利用可视化计算并绘制流前图，而后将其与动光弹条纹图相比较，进而利用所推导的应力波迭加分析式判断出物体边界或其内部的应力波迭加效果。文中对圆盘中的几个典型区域进行了实例分析。